
Office (519) 888-4567 ext:35177
Lab (519) 888-4567 ext:35335
A superconducting transition edge sensor (TES) can be used to
make the most sensitive thermometer which operates in a very
narrow temperature range (<5mK). A TES takes advantage of the
very sharp transition from normal resistance to
superconductivity. Within this transition a very small variation
in temperature corresponds to a large change in resistance. When
the sensor is thermally balanced at the transition temperature,
it can be used to detect very small temperature fluctuations. In
order to select an operating temperature, a TES is fabricated
with a thin film of normal and superconducting metal. Due to the
proximity effect, their relative thicknesses determines the
critical temperature of the
bi-metal. TES's have many advantages over other thermometers.
For example, the TES's size is useful when working in low
temperature physics where space is limited in dilution
refrigerators and other cryogenic apparatus. TES's are highly
sensitive to variations in temperature and energy, the TES's
fabricated in our lab are able to measure changes in energies on
the order of 10-19J, which is many orders of magnitude better
than conventional techniques. High accuracy is important for
sensitive measurements, as well as low noise. The TES's made in
our group have a noise sensitivity of of less than 1nK/sqrt(Hz).
A TES can be used anywhere a high energy sensitive sensor is
required, it can be used as a calorimeter to measure a heat
change or as a bolometer to detect power absorption.
A TES can be described by four characteristics known as the
normal state resistance, the critical temperature, the
transition width and the alpha parameter. All of these
parameters are used to compare sensors. Alpha is a dimensionless
coefficient which defines the sharpness and sensitivity of the
superconducting-to-normal transition. This dimensionless
temperature coefficient is a function of bias current, applied
magnetic field, and temperature (bias point) within the phase
transition. Practical values are in the range of 40-500 and have
found to be as high as 2500. Our sensors have alphas as high as
1200 here at Waterloo.